Front-mounted double-knife mower Seco Duplex

Our front butterfly mower impresses with its excellent overview when mowing and maximum efficiency. As the entire machine is in the driver's direct field of vision, obstacles can be detected early and without difficulty.

The entire working width can be fully utilised without creating unnecessary overlap. At the same time, the individual cutter bars adapt independently to the ground, thereby ensuring the best cutting results and a clean cut even in difficult conditions.

This mower is available in working widths from 6.5 m to 10 m.

Video Gallery

Play

Standard equipment

Hardox skid plates (cutting heights of 4-20 cm, selectable set)
From cutter bar 2.75 m: with beam reinforcement!
Weiste triangle mount incl. 3-point mount CAT 2
All parts powder-coated or electro-galvanised
Bidux cutting unit with unequal blade spacing
Defined cutting unit lift of the side mowers with two hydraulic cylinders each
Adjustable hydraulic breakaway protection for side mowers
Oil cooler temperature controlled
Adjustable pressure relief valve (for each drive separately; protects the cutter units in case of overload)
Mower deck control with control box - each mower deck can be raised and lowered independently - each mower deck can be switched on and off independently - with integrated tachometer (for monitoring optimal blade speed) - with integrated operating hours counter
Mowing deck with its own independent oil supply: Drive via front PTO shaft 1,000 rpm (PTO shaft direction of rotation: clockwise when viewed in the direction of travel); operating speed of the PTO shaft when mowing: approx. 700 rpm

Optional equipment

Mower deck control with joystick
Walterscheid driveshaft
Boasting
Splash plates
Road Traffic Regulations set with LED position lights, LED indicators and warning plates
Oil cooler, temperature-controlled
Deviating PTO speed
Reverse and reduction gearbox
Limiting chains
Helper springs
Mirror set
Side mowing unit with drive shoe
Hydraulic front power take-off, drive via tractor hydraulics
Special frame for mowing very high cuttings
Flip-up mechanism for excessive resistance on the central cutterbar
Hydraulically height-adjustable support roller for side cutter bar
Butterfly strain
Work lamp
Wildwarner
Rapeseed cutter bar on the central cutting unit
Longer control cable between control panel and mower
Wiring harness for tractor

Technical Specifications

	650F	700F	800F	850F	900F	950F	1000F
Header width in metres	6,50	7.00	8.00	8.50	9,00	9.50	10,0
Weight Base machine in kg	910	930	950	970	990	1020	1050
Transport width in metres	2,98	2,98	2,98	2,98	2,98	3,35	3,50
Power requirements In PS	17	18	20	22	24	26	28
Configuration the cutting bars	1 x £2.75 \| 2 x £1.95	1 x 2.75 \| 2 x 2.40	1 x 2.75 \| 2 x 2.75	1 x £2.75 \| 2 x £2.95	1 x £2.75 \| 2 x £3.35	1 x 3.10 \| 2 x 3.35	1 x 2.75 \| 2 x 3.75